Models: I-line Panels

 

600A Mini I-Line Panel



600A 27" I-Line rated for 600VAC, Aluminum enclosure, stainless steel protective frame with two 10" casters, certified by UL under UL1640 Portable Power Distribution Panel. CSA Standard for safety for Industrial Control Equipment, CAN/CSA C22.2 No.14 (Canada) tested by ETL.

600A 600VAC Portable I-Line Panel:

  • 0.090" aluminum enclosure, NEMA 3R powder coated RAL7035
  • Stainless steel frame with forklift pockets and lifting eyelets
  • Two 10" never flat casters
  • 600A 600VAC 3P-5W, 27" spacing I-Line interior
  • Two sets of Male 400A 16 series Camlok Input with snap covers
  • Four removable gland plates
  • Large clear polycarbonate window
  • Pad-lockable door with four 1/4 turn latches 
  • Bottom access trap door (hardwire out access).






600A Mini I-Line Technical Features





  1. Heavy-duty stainless steel cage.
  2. Lightweight aluminum enclosure, NEMA 3R, powder coated RAL7035.
  3. Four removable side gland plates with five position holes for a total of ten output receptacles.
  4. Padlockable main door with clear polycarbonate window.
  5. 600A 347/600V Square-D I-Line interior.
  6. Two solid 10'' Never-flat casters.
  7. Bottom access lockable trap door for hardwire in/out applications.
  8. Large forklift pockets.



FEATURES

I-Line Panel features:
  • Square-D I-line panelboards are UL/C and UL listed under file E33139.
  • Available with  thermal magnetic, Micrologic and electronic circuit breakers.
  • I-Line circuit breakers, with their exclusive plug-on connection design provide superior reliability and performance advantages.
  • 15-150A frame circuit breakers require only a screwdriver firmly onto the bus stack. They are secured in place by a screw.
  • The connectors are an integral part of the I-Line circuit breaker, eliminating the assembly of connectors to the bus bar.
  • The unique line side connection requires no routine maintenance.
  • All test are conducted in accordance with UL67 and CSA C22.2.
  • Solid neutral is mounted in the mains compartment with the main lugs.
  • Available with short circuit current rating (SCCR) up to 200kA (Max. 100kA @600V).
Power Distribution Panel features:
  • 0.090" Aluminum NEMA 3R enclosure, powder coated RAL7035.
  • Heavy duty carbon steel skid with large pockets and lifting eyelets.
  • 600A MLO I-Line panel board with 27" spacing.
  • Male 400A 16 series Camlok Input with snap back covers.
  • UL1640 Listed, Portable Power Distribution Panel, file number E350898.
  • CAN/CSA C22.2 No.14 Listed and tested by ETL, Industrial Control Equipment.
  • Bottom service trap door for easy access to main lugs for hard wire in/out.
  • (4x) removable gland plates.


APPLICATION

600A Portable I-Line Panel application:
  • For use as a temporary power distribution system in industrial plant shutdowns/ maintenance.
  • I-Line circuit breaker power distribution panelboards are for use on AC or DC systems.
  • Suitable for use as service entrance equipmetn in construction sites, utility plants and refineries.
  • Temporary power for remote work areas, job trailers and man-camps in the oilfields, military and events.